Skip to content

How To Remove Solder From Copper Pipe

Soldering is a process of joining two metals by heating them to a temperature that allows the solder to flow freely between them. Solder is made up of a metal alloy, usually tin and lead, which melts at a lower temperature than either of the metals being joined. When the solder is melted, it flows between the two surfaces and forms a bond. Soldering copper pipe is a common plumbing task. However, if you need to remove the solder from copper pipe, there are a few

How To Remove Solder From Copper Pipe

There are a few ways to remove solder from copper pipe. One way is to use a soldering iron and a solder sucker. Another way is to use a propane torch and a solder braid.

-copper pipe -solder – flux -soldering iron -tin snips

  • Up oxidation from the copper pipe
  • Apply flux to the copper pipe and the solder joint. heat the solder joint with a soldering iron until the solder liquef
  • Using a wire brush, remove any debris or built

– Use a solder removal tool to remove the solder from the copper pipe. – Apply flux to the copper pipe and the solder removal tool. – Put the solder removal tool over the solder on the copper pipe and heat it up. – When the solder is melted, pull the solder removal tool off of the copper pipe.


Frequently Asked Questions

How Do I Completely Remove Solder?

There is no one-size-fits-all answer to this question, as the best way to remove solder depends on the type of solder and the amount of solder that needs to be removed. Some tips for removing solder include using a blowtorch, an oven, or a desoldering pump.

How Do You Remove Solder Without Tools?

There are a few ways to remove solder without tools. One way is to use a heat gun or a soldering iron with a low-heat setting. Another way is to use a desoldering braid.

How Do You Remove Solder Without A Torch?

There are a few ways to remove solder without a torch. One is to use a soldering iron with a low-wattage setting and apply heat slowly. Another is to soak the solder joint in water for a few minutes, then use a wire brush to scrape off the solder.

How Do You Remove Old Solder Pipes?

When removing old solder pipes, a heat gun can be used to soften the solder and then a pipe cleaner can be used to remove the solder.

What Will Dissolve Solder?

Solder will dissolve in a solvent that is hot and has a low pH.


In Summary

If you are having trouble removing solder from copper pipe, use a degreasing agent.

Leave a Reply

Your email address will not be published.